The cap is made from 6061-T6 aluminum alloy (see Note 1)with anodized surface which is same level as iPhone equivalent standard; include anti-corrosion and anti-UV for 60 hours endurance under 100 eV UV exposure and there are black、 gold and、 titanium for color options.
Note 1: (6061 aluminum alloy contained:： Silicon 0.4%~0.8%；Copper 0.15%~0.4%，Magnesium 0.8%~1.2%；Chromium 0.04%~0.35%，Tensile Strength 42,000 psi (290 MPa)，Yield Strength 35,000 psi (241 MPa)，while thickness is less than0.25 inch（6.4mm）Tensile Strength is 8% or more。while thickness is greater than 0.25 inch（6.4mm），Tensile Strength is 10%)
Installations and precautions:
(Left and right reservoir cap installation)
1. Remove the screw and the original cap (to aware not to leak the brake oil).
2. Retain the original rubber seal and place the DIMOTIV reservoir cap on oil tank. Secure the original screw back to finish the installation.
(Rear brake reservoir cap installations)
1. Remove the original cap and replace with DIMOTIV reservoir cap to finish installation.
Sport
Street
Offroad
Cruiser
Touring
Scooter
Universal
